Are you thinking of installing a Ring Doorbell in your home? Worried about the orientation of your doorframe? We have some good news for you. Yes, it is possible to install a Ring Doorbell sideways! In this blog post, we’ll explain how and why it can be done.
Understand the Basics of Installing a Ring Doorbell
Installing a Ring doorbell is an easy way to improve your home security with the ability to monitor your front door from anywhere. To get started, you’ll need to make sure you have the right equipment, such as the Ring Doorbell and the necessary tools for installation. You’ll also need to be familiar with the basics of installing a Ring doorbell so you can get it up and running quickly and safely.
First, you’ll need to choose an appropriate location for your Ring doorbell; ideally one that is close enough to a power source like an outlet or a hardwired connection. Once you have chosen your spot, use the included mounting bracket and screws to affix it securely in place. Make sure it is level and flush with the wall or door frame.
If you are using a battery-powered option, you can install it either vertically or horizontally, depending on what works best for your space. However, if you are hardwiring the device, then you will need to install it in a vertical position so that its wires are out of sight. Then it’s time to connect the device to power or connect its wires in accordance with local wiring codes.
Finally, use the Ring app on your smartphone or tablet device to connect your new Ring doorbell with Wi-Fi and set up motion detection alerts so that you can be notified when someone approaches your door. Keep in mind that you may also want to adjust other settings such as motion sensitivity and video
How to Install a Ring Doorbell Sideways
Installing a Ring Doorbell sideways is possible, but it’s not recommended. The video will always be displayed vertically regardless of the orientation of the doorbell, and there’s no configuration setting to rotate the video image. Although you can install it horizontally, the motion sensors in the doorbell are designed to detect motion up to 180 degrees horizontally and from five to 30 feet outward from the doorbell. It’s best to install it vertically for optimal performance. To do so, make sure you have all the necessary hardware, including anchors and screws, so that you can securely mount the device.
Choosing Your Mounting Location
Choosing the right mounting location for your Ring Doorbell can be a crucial factor in getting the best experience from your device. To get optimal results, you should choose an area that is at least four feet off the ground and is well-lit. The camera should also face outwards so it has a clear view of the entrance. If you want to install your Ring Doorbell sideways, you can use an adjustable angle mount to do so. This will help the camera capture footage at different angles and give you a more complete view of the area. Additionally, when installing your device make sure there are no obstructions that could block the camera’s view and make sure it’s securely mounted in place. With these few tips, you’ll be able to find the perfect spot for your Ring Doorbell.
Mark the Holes for Drilling
Marking the holes for drilling is an important step when installing a Ring Doorbell. It helps you to ensure that you have accurate and precise measurements when drilling and mounting your device. To mark the holes for drilling, you will need to use a paper template that comes with the doorbell to show how far apart you should drill each hole. Once you have marked the holes, use a drill to drill the holes into the surface where you want to mount your Ring Doorbell. You can even install your Ring Doorbell sideways if desired, by using a Ring Adjustable Angle Mount. Be sure to use wall anchors if necessary and follow all safety instructions when using power tools!
Drilling the Holes in the Wall
Drilling holes in the wall can be an intimidating task, but with the right tools and steps, it’s easy to do yourself. If you’re installing a Ring Doorbell, drilling holes in the wall is necessary for optimal performance. It’s important to follow the instructions provided by Ring when drilling these holes and make sure to measure twice before drilling. For sideways installations, you may be able to use an angled mounting bracket that allows you to mount your Ring Doorbell at a different angle than normal. This can help reduce glare from sunlight or provide a better field of view. Make sure to check with Ring for specific instructions when mounting your doorbell sideways.
Attaching the Mounting Plate to the Wall
Attaching the Mounting Plate to the Wall is an important step when installing a Ring Doorbell. It’s easy to do and can be done in just a few minutes. First, start by inserting the included screws into the holes at the top of your mounting plate. Then, position the plate against the wall where you want to mount your Ring Doorbell. Using a drill or screwdriver, tighten each screw into the wall until it’s securely in place. Finally, attach your Ring doorbell to the mounting plate and make sure it’s securely fastened.
It’s not recommended to install your Ring Doorbell sideways or horizontally as it won’t display video correctly. If you have aluminum siding or a door at the top of steps, you may need additional hardware such as a Corner Kit to mount your doorbell at an angle. The included installation guide should provide more information on how to do this properly so that your Ring Doorbell is securely mounted and working correctly.
Connecting and Securing Wires for Power and Network Connection
Installing a Ring Video Doorbell is a great way to increase your home’s security. Before you begin, make sure to disconnect the power from your circuit breaker or fuse box. Then, connect the wires to the screw terminals on the rear of your Video Doorbell Wired. Once connected, tighten the screws to secure the wires in place. If you don’t have existing doorbell wiring, consider the Eufy Security Video Doorbell 2K (Battery-Powered). The Clare Video Doorbell v3 can be connected to either a 2.4GHz or 5GHz Wi-Fi network and requires a connection to an existing doorbell terminal. Make sure to insert one end of the wire harness into the doorbell power module and then attach it to your own wiring. Finally, you need to connect exposed wiring to the video doorbell power terminal and tighten two small screws to securely connect your doorbell. If you are replacing an existing doorbell, you must install the included power kit as well. To complete your installation, mount your Ring Doorbell in its desired position – even sideways if that’s what works best for your setup!
Placing the Ring Doorbell on its Mount
Placing the Ring Doorbell on its mount is an important step in getting your doorbell set up. It’s recommended to install the doorbell vertically, as this is how it was designed to work. While it is possible to install it horizontally, it isn’t recommended as the video quality won’t be optimal when displayed vertically. Some homes have their doorbell plate mounted horizontally, but the motion sensors won’t be able to detect motion as accurately. The corner mount accessory can be used to angle the Ring Video Doorbell 2 15 degrees left or right away from the wall if needed. Installing the Ring Doorbell sideways is possible, but due to a lack of configuration settings, it isn’t recommended.
Adjusting View Angle if Necessary
Adjusting the view angle of your Ring Doorbell can help you get a better view of what is happening outside your front door. To adjust your Ring Doorbell’s view angle, you can either use an angle wedge or a corner mount. The angle wedge will allow you to adjust the viewing angle up to 15 degrees to the left or right. The corner mount, on the other hand, will let you adjust the view angle up to 45 degrees left or right. If necessary, you can also install your Ring Doorbell sideways. To do this, simply unscrew the doorbell and rotate it until it is in the desired position. After it has been rotated, reattach it using the provided screws and make sure that it is securely fastened in place.
Testing if Everything Works Properly
It’s important to make sure that your Ring Doorbell is properly installed and working properly. This includes testing it to make sure that everything is functioning correctly. To do this, you will need to check the voltage, ensure proper positioning, and verify that the doorbell is receiving power. If your Ring Doorbell Pro isn’t receiving power, you may need to adjust the wiring or check the fuse box for a possible issue. Additionally, you will need to mount your Ring Doorbell correctly according to the style of back plate. After mounting, you can launch a live stream and use it to monitor visitors at your door. Finally, it’s important to remember that your Ring Doorbell should always be installed on the same side as the door knob. With proper installation and testing, your Ring Doorbell will be up and running in no time!